FREE SHIPPING ON ALL ORDERS OVER $150!
$32.49 – $188.49
– Our Superclear® Liquid Glass® Deep Pour Epoxy can be poured anywhere between 2-4” with ease!
– SuperClear® 2.0 cures rock-hard, giving you unparalleled structural integrity, and is able to withstand years of wear & tear without a problem!
– Liquid Glass® Epoxy is a low viscosity formulation that effortlessly allows for bubbles to rise to the surface as it cures. Giving you a crystal clear finish every time!
– Fiberglass Coatings, Inc. is based out of Saint Petersburg, FL and has been in business for over 60 years! We are proud to say we are made 100% in the USA!
-
Our Liquid Glass® Deep Pour Epoxy is absolutely unparalleled with a deep pour capability of 2-4 inches and gives you unmatched industry performance, convenience by eliminating 75% of your work, and the clearest finish you can get on the market today!
Easily calculate your epoxy pour volume with our Epoxy Resin Calculators!
Read more about Liquid Glass Deep Pour on our blog!
Using the Coverage Chart, determine the amount of epoxy you will need for your project. Be sure to order SuperClear® Table Top Epoxy for a seal coat to ensure best results!
Ensure your working environment is clean, dry and at least 70 degrees for best results. Lay down a plastic sheeting below your project for a safe, easy cleanup. Make sure your surface is completely level, as the epoxy will self-level.
Seal Coat – Be sure to clean the surface with Isopropyl Alcohol 90% + and apply your sealcoat with a brush, following all mixing directions for that product. Let it get tacky before pouring your deep pour. If the seal layer is fully cured, for best results, lightly sand the surface with 320 grit sandpaper and clean with Isopropyl Alcohol 90% +, and then pour the deep pour.
Mixing Deep Pour – Measure 2 parts Resin to 1 part Activator and pour into a clean, dry bucket or cup. Stir the mixture for at least 5 minutes with either a stir stick (if mixing with a stir stick, do not mix more than 1 quart) or a drill mixer set to low. Ensure you are not whipping air into your epoxy. Be sure to scrape the sides and bottom to ensure all of your epoxy is properly mixed.
Transfer contents to a new, clean, dry bucket or cup and continue mixing for 3 more minutes to ensure proper mixing, again scraping sides and bottom.
Pour mixture directly into your mold at your desired depth. Do not scrape the bucket at this time. If you do, you risk scraping in unmixed material that has clung to the sides or bottom. This would result in soft spots and/or hotspots.
Use a heat source, like a heat gun to remove any air bubbles. Start at 6” minimum above the surface and sweep back and forth until no bubbles remain. Do not leave the heat gun over the surface too long, if you do, it may result in surface distortions.
Allow the surface to cure, up to 72 hours in a dust-free environment. The epoxy will start to get tacky after 24 hours but do not disturb for 72 hours to ensure a proper cure.
– You need to stir it by hand for a minimum of 5 minutes, scraping the sides and bottom thoroughly throughout while mixing. When pouring, we do not recommend scraping the sides. Doing so can risk mixing in unmixed, unincorporated epoxy into your pour, thus creating curing issues.
– You can pour up to 4” thick per pour, depending on ambient temperature and total mass. Much thicker than most competitors! The mass for a 4” pour varies depending on temperatures and conditions. If you have never poured a deep pour at 4”, we suggest you try it on a smaller scale to understand how it will cure in your particular environment.
– The product will begin to harden within the first 12-24 hours in ideal conditions, but takes 48-72 hours to completely cure, depending upon conditions like constant temperature, humidity, mass and airflow.
– Yes! Simply wait until the pour is tacky and nearly hard and pour your next layer. If the product is already hard, lightly sand with 220-320 grit sandpaper and wipe it down with Isopropyl Alcohol 90% or higher before adding additional layers, which helps with the adhesion between the two layers.
– While you can clamp down your wood during a deep pour, be sure not to clamp it too tightly. As the epoxy cures, the wood needs some room to flex while it turns from a liquid to a solid. Without room to flex, pressure will build in the epoxy, resulting in stress, increased heat, and even cracking. To avoid this, only finger tighten your C-Clamps or use light enough weights to keep the wood from floating.
While our product can be used in a variety of applications, not all users or environments are the same. As such, specific directions for all individual users might not be addressed in the directions. If there are any questions that our directions do not answer, pertaining to the individual customer’s application, it is the customer’s sole responsibility to contact us directly with any technical questions and procedures prior to the application of the product. See below for various means to obtain further information and or contact us directly; we offer FAQs on our website and technical service via Email or phone Monday through Friday, 9am-4pm EST.
For more product information, please visit:
www.SuperEpoxySystems.com
(888) 849-0588
superclear@fgci.com
Temperature : Volume & Depth Info
Always pour in a temperature controlled environment. Ideal working temperatures are 70°F to 84°F, but this is dependent on the total volume and depth of the project. The greater the volume or thickness of the pour, the lower your temperatures should be.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Shelf Life | Unopened: 6 – 12 months* *depending upon how the product is stored. |
-
Select options This product has multiple variants. The options may be chosen on the product page
-
Select options This product has multiple variants. The options may be chosen on the product page
-
Select options This product has multiple variants. The options may be chosen on the product page
Paul Mann –
I’ve been working with epoxy for little over a year. WHENEVER, I try something stupid, I call Kevin and Stephen in tech support, they are Great and always willing to help!! Epoxy humidor (before cutting and adding cedar). Deep pour walls of box, 9mm. Beveled edge and used the Super Bond epoxy, incredible stuff.
Kxs –
I am just starting with a table project for the first time. I have no experience with the epoxy so far. Sales and technical team has been very helpful in selecting the products and how to go about it.
Hoping to finish the project in next month and looking forward to a wonderful experience.
Nic Tones –
It’s my go to epoxy. Deep pour and can’t go wrong. Just keeping it at the right temperature and mixture, it’s been great to use. U
Captain Nou Phousirith (verified owner) –
I’ve been using Liquid Glass Deep Pour for over a year now and have been very happy with the product. I always get crystal clear on my pours and the epoxy blends will with Eye Candy mica powder.
Peace River Wood Works (verified owner) –
Awesome products, fast shipping, and great prices!
Bill Stuewe, Stuewe Woodworking LLC (verified owner) –
For years we had been using a different version of epoxy and during Covid we had a hard time getting it so we tried FGCI’s and were very impressed and decided it was time for a change. We use both the Liquid Glass version and the Super Clear
William Atchley (verified owner) –
I have used deep pour and table top epoxy for several projects. The clarity is “liquid glass”!! I have even used the table top epoxy for creating ocean art and everything has turned out great.
Michele (verified owner) –
I have been using Super Clear Deep Pour for over a year now and have been so satisfied with how clear it dries. I also have been impressed with how quickly the product is shipped and the responsive/informative customer service I receive through email.
Here are a couple items I have made.
Chris (verified owner) –
I have used several other epoxy brands but fell in love with superclears epoxy’s. I’ve used the deep pour epoxy and it’s so easy to use. Have another project coming up and will be using it as well!
Chris Valiquette (verified owner) –
SuperClear deep pour is my go-to epoxy when I need dependable, consistent results… and the results speak for themselves. I also use SuperClear tabletop for flooding my clocks to give them a durable glass-like finish. They both mix up nice and clear and play nice with any brand pigment I’ve used so far.
Abe Burman (verified owner) –
I use deep pour for all of my projects. Mixes well and has no smell. Used for a mall crack repairs, cribbage boards to large desk pours.
Joseph Kennelly (verified owner) –
Just started live edge epoxy work. I did a lot of research before deciding on superclear deep pour. This product did not disappoint, easy to use and has amazing results! I will definitely be a repeat customer.
Doug Degriselles (verified owner) –
This deep pour is my go to resin, price is great, never have had any issues with bubbles, cures great
Mike Battuello (verified owner) –
Great product! Very easy to use and lives up to the SuperClear name … incredible clarity. Technical support team is amazing … willing to help with any/all questions.
Ken McAvoy (verified owner) –
This is my go to for all my products. I have had nothing but excellent results. Customer service is awesome as well. If you ever have any questions they are makers as well.
Couldn’t leave photo. Not a spot to upload.
Todd Johnson (verified owner) –
I love Superclear Liquid Glass. Have never had an issue with it. Cures clear and easy to use.
Andrew Boyer (verified owner) –
The best epoxy out there — clarity, bubbles, mixability, etc. AND the best prices out there. This stuff is a no brainer! Customer for life.
Justin Kyle (verified owner) –
The deep pour is super clear as in the name, easy to use, the prices are great and super fast shipping.
Michael Ellenby (verified owner) –
This is a fabulous epoxy. Works perfectly, makes great river tables. Buy it!
Curtis M Warnes –
I have been a full time artist for over 20 years and have been making tables with epoxy for 12 years. This is by far the best product on the market for all applications.
Greg Urquhart (verified owner) –
Best product for my deer pour artwork! Great to use and great clarity!
Ryan Leach (verified owner) –
Worked like a charm. Used this product to build a river coffee table. Did a deep 3-inch pour with no issues. Will for sure use this on future projects.
Mike H. –
Just built a sit/stand desk and used this epoxy with a couple of box elder slabs and it turned out great! No major issues with bubbles or anything and once flattened, sanded, and finished I couldn’t be happier.
simon silver –
I have ordered thousands of dollars of this epoxy at this point. It is unparalleled in ease of use and clarity. It ships fast, and the price is competitive.
B Squared Woodworking (verified owner) –
When we first started working with epoxy we trialed several different brands. Superclear was the definite favorite. It has the best clarity of everything we tested and seems to have the least amount of bubbles. The biggest benefit is the ability to pour deeper than most other brands so we can pour pieces over 1″ thick in a single pour, saving time.
Brandon D –
Easy to work with, priced well, and has unmatched clarity. Highly recommend
Artchuterie (verified owner) –
We have been making charcuterie boards and tables with Superclear Liquid Glass for nearly 2 years now and have nothing but good to say about it.
Deepest pour so far has been just under 2″. But we have never had any issues with discoloring or cracking or overheating.
I cannot imagine even trying another brand.
Scott Debnam (verified owner) –
Great epoxy! I recently switched brands and Love the way this stuff works! Customer service was also helpful with questions I had!
Joseph Martin –
What can I say! Superclear epoxy is by far the best epoxy I have used for my projects! One of the best things is how crazy clear the epoxy becomes while mixing and after its cured! I will continue to purchase this deep pour epoxy for all my projects! Keep it up Superclear with your amazing products!
D Inspirations LLC (verified owner) –
We have been using both the liquid glass deep pour and table top epoxies for a few years now. They are both top quality and produce amazing results. Easy to work with, priced well and highly recommend. We won’t even try any other epoxy because we know Superclear ALWAYS delivers!
KaleidoStone Coastal Design, Elena –
You can always trust SC to yield beautiful, crystal clear and long lasting results on all of your projects. It’s so easy to work with and a value beyond compare! Thank you for creating a superior product
Nick Leigh (verified owner) –
When I started using epoxy, I was using stone coat countertop epoxy. One of their products had solidified resin in a brand new jug, and did nothing to resolve the issue. So I tried this deep pour system. It was a million times better than stone coat’s product. I have used it many times for many projects, and it is always amazing!
Debbie Mulherin (verified owner) –
We have used the Liquid Glass Deep Pour for several 8′ tables, coffee tables, sofa tables, and end tables without any issues. Love this product! No issues with smell or irritants. Clarity is superb! Highly recommend this product.
Steve’s woodworks (SDG WoodStylez custom river tables) (verified owner) –
Always crystal clear when following directions. I bought close to 50 gallons over my tenure and will continue to do so. Great product and great affiliates
Ryan Royal (verified owner) –
super clear is super clear!! love the low to no bubble action. i have made several large tables with super clear deep pour and it’s been my go to..
Rachel Wu (verified owner) –
I live this Epoxy for all my floral arrangements and deep pours. It’s the best one out there!
Rachel Wu (verified owner) –
Hands down the best, most clear deep pour epoxy out there!
Jen (Wild North Design) –
We’ve been using this product for over 2 years with success every single time. As advertised, super clear, cures to perfection and almost no fumes.
Jeff Dudley (verified owner) –
Absolutely love this product. Product description is very accurate, dry time, very few bubbles, and mixes well with all pigments. Best part for me is there is no odor.
Janelle F (verified owner) –
Deep Pour is my go-to for all tables I make! You can’t beat the clarity. It puts all others to shame. 5 year user
Bryan Herriford (verified owner) –
Best epoxy I’ve used. I won’t use anything else for my epoxy charcuterie boards
Melinda Kaufman –
Liquid Glass is my #1 go to product when I can’t have any bubbles in my pour. I’ve used it several times for dried flower arrangements, and they come out pristine, and no yellowing either! Amazing product!
Nathan Guzman (verified owner) –
I’ve been using the liquid glass deep pour epoxy to make river tables. It’s a great super clear product!! I’d recommend it to anyone!!!
Joe Alexander –
A woodworker for years, I introduced resin to my work in 2021. There is a huge learning curve. I tried many cheaper and inferior products. I even tried two, more expensive and inferior, products for a while before finding SuperClear.
SuperClear is more forgiving for new users. You definitely should follow the directions, but in the beginning, maybe you don’t know your table isn’t perfectly flat, so your cup isn’t level, and then your mixture is SLIGHTLY off the 1:1 or 2:1 mixture. SuperClear will still fully cure and be rock solid, where I have had other resins not fully cure. It’s just not as finicky.
I had struggled with micro bubbles with other products. Even a 3:1 which should allow them to escape before curing. I now have SUPER CLEAR pours!
I am so happy with this company and with their products. I definitely recommend you try this for your next project. With the discount they offer all-the-time, it makes it much more affordable than you’d expect for the quality you receive.
Happy creating!
Donald Clement (verified owner) –
We have completed numerous tables and desks and have found no other epoxy that compares to the SuperClear deep pour. The clearness, integrity and consistency is spot on. We will continue to use this product as we have all the confidence in the world using it. Highly recommend.
James C Lund (verified owner) –
SuperClear – Liquid Glass deep pour is indeed super clear. I have been building tables and bar tops for luxury homes and restaurants using liquid glass. It has never let me down yet. The viscosity is nice and thin and cure time is 3 days giving those little bubblers plenty of time to stop and clear up. It tolerates alcohol based pigments well. Price per gallon along with performance is a superclear choice for me. The folks at the factory are happy to answer your questions and offer advice. In my case they even put me in touch with their lead chemist for all the technical questions and concerns I had because building a $6000 table and your business reputation is a very serious matter. When all your business walks in to you because they have seen a previous work validates your system. Superclear is a quality component in that system of no compromises and no short cuts.
James Lund (verified owner) –
SuperClear – Liquid Glass deep pour is indeed super clear. I have been building tables and bar tops for luxury homes and restaurants using liquid glass. It has never let me down yet. The viscosity is nice and thin and cure time is 3 days giving those little bubblers plenty of time to stop and clear up. It tolerates alcohol based pigments well. Price per gallon along with performance is a superclear choice for me. The folks at the factory are happy to answer your questions and offer advice. In my case they even put me in touch with their lead chemist for all the technical questions and concerns I had because building a $6000 table and your business reputation is a very serious matter. When all your business walks in to you because they have seen a previous work validates your system. Superclear is a quality component in that system of no compromises and no short cuts.
Ben (verified owner) –
Second time buying, amazing product, amazing customer service 10/10 recommend and will be buying again.