Superclear® Epoxy Systems — Made in the USA

Which Clear Epoxy
Is Right for You?

Four professional-grade formulas, zero VOCs, food-safe once cured.
Pick by pour depth. Ship today.

Compare Products ↓ Epoxy Calculator →

Start here — pick your pour depth

⅛–¼"

Thin coat / bar top

→ Table Top 1:1

Up to 1"

Single-layer table

→ 24 Hour LG 2:1

2–4"

River table / casting

→ Deep Pour 2:1

Any

Art & craft medium

→ Designer Art Resin

The Full Lineup

Four Formulas. One Standard.

MOST POPULAR Superclear Table Top Epoxy 2 Gallon Kit

Mix 1:1 by volume

Table Top Epoxy 1:1

The bar-top standard.

Pour Depth

⅛–¼" per coat

Working Time

~45 min

Demold

24 hrs

Full Cure

30 days

Best for

  • Bar & table tops
  • Wood coatings
  • Countertops
  • Art topcoats
  • Hospitality surfaces

Not ideal for: Thick pours or casting

Self-leveling. Crystal-clear gloss. Food-safe once cured.

Shop Table Top →
DEEP POUR Liquid Glass Deep Pour Epoxy 3 Gallon Kit

Mix 2:1 by volume

Liquid Glass Deep Pour 2:1

Built for river tables.

Pour Depth

2–4" per pour

Working Time

60–90 min

Demold

48–72 hrs

Full Cure

30 days

Best for

  • River tables
  • Live-edge casting
  • Large voids & fills
  • Molds
  • Resin art

Not ideal for: Thin coatings or bar tops

Ultra-low exotherm. Pours up to 4 inches in a single pass.

Shop Deep Pour →
FAST DEMOLD Deep Pour 24 Hour Epoxy 3 Gallon Kit

Mix 2:1 by volume

24 Hour Liquid Glass 2:1

One pour. One day.

Pour Depth

Up to 1" per pour

Working Time

30–45 min

Demold

24–36 hrs

Full Cure

30 days

Best for

  • Single-layer table tops
  • Moderate fills
  • Faster project timelines
  • Mixed medium art

Not ideal for: Pours over 1" thick

Demold in 24 hours. Ships same specs as our deep-pour formula.

Shop 24 Hour →
ART & CRAFT Designer Art Resin Epoxy 2 Gallon Kit

Mix 1:1 by volume

Designer Art Resin 1:1

Made for makers.

Pour Depth

Thin coats as medium

Working Time

~45 min

Demold

24 hrs

Full Cure

30 days

Best for

  • Petri art
  • Tumblers & geode art
  • Jewelry casting
  • Painting medium
  • Craft projects

Not ideal for: Structural or deep pours

Formulated for vivid color response. Compatible with pigments, micas, and alcohol inks.

Shop Art Resin →

Side by Side

Spec Comparison

Spec Table Top 1:1 Deep Pour 2:1 24 Hour LG 2:1 Designer Art Resin 1:1
Mix Ratio 1:1 by volume 2:1 by volume 2:1 by volume 1:1 by volume
Pour Depth ⅛–¼" per coat 2–4" per pour Up to 1" per pour Thin coats as medium
Working Time ~45 min 60–90 min 30–45 min ~45 min
Demold Time 24 hrs 48–72 hrs 24–36 hrs 24 hrs
Full Cure 30 days 30 days 30 days 30 days
Food Safe ✅ FDA Certified (when cured) ✅ Yes (cured) ✅ Yes (cured) ✅ Yes (cured)
Zero VOC ✅ Yes ✅ Yes ✅ Yes ✅ Yes
UV Resistant ✅ Yes ✅ Yes ✅ Yes ✅ Yes

Why Superclear

Made in the USA

Batched and tested at our St. Pete facility — not overseas

Food Safe (Cured)

Meets FDA guidelines for indirect food contact after full cure

UV Resistant

Non-yellowing formula — stays crystal clear for years

Real Expert Support

We make the product. We answer the phone.

Common Questions

FAQ

What is the difference between 1:1 and 2:1 epoxy?

The ratio refers to parts A to parts B by volume. A 1:1 formula (Table Top, Art Resin) mixes equal parts. A 2:1 formula (Deep Pour, 24 Hour) mixes two parts A to one part B. The 2:1 chemistry is engineered for lower exotherm — meaning it generates less heat during cure — which allows thicker pours without cracking or yellowing.

How do I know which pour depth I need?

Measure the deepest void you need to fill in a single pour. Under ¼ inch: Table Top 1:1. Up to 1 inch: 24 Hour Liquid Glass. 2–4 inches: Liquid Glass Deep Pour. Building up in multiple ¼" coats is always an option with Table Top if you prefer a slower layered approach.

Are all Superclear products food safe?

Yes — all four formulas meet FDA guidelines for indirect food contact once fully cured (30 days at room temperature). During mixing and curing the resins should not contact food. After 30 days, the surface is inert and safe for use as a bar top or countertop.

Can I topcoat my deep pour with Table Top Epoxy?

Yes, and this is a common workflow: pour your river table fill with Liquid Glass Deep Pour, let it fully cure, then sand and apply a final coat of Table Top 1:1 for a high-gloss, scratch-resistant finish. The products are compatible by design.

What if I need help choosing?

Call us — we make these products and we answer the phone. You can also use our epoxy calculator to estimate volume and coverage for your specific project.